MAJESTIC TECHNICAL RIDER · 2026
TECHNICAL
RIDER

Please read carefully and confirm all requirements at least 72 hours before the event.

Artist: Majestic

Real name: Raymundo Hooten

Genre: D&B · Raggajungle · Tekno · Juke · Footwork · Bass Music

Origin: Amersfoort, NL

V 2.1 — 2026

PLEASE NOTE: All equipment must be in full working order prior to the artist's arrival. Firmware must be updated to the latest stable version. The artist plays primarily from USB drives — no laptop required. Do not connect unknown devices to the setup without explicit permission. If the venue cannot meet the primary setup, contact the artist via Instagram @djmajestic at least 72 hours in advance.

01

DJ Equipment

PREFERRED Setup A — CDJ-3000
2 × Pioneer CDJ-3000
Linked via LAN / Pro DJ Link · Latest firmware · USB slots free and functional
1 × Pioneer DJM-A9 or DJM-V10
4-channel mixer · EQ at 12 o'clock · All channels open · Latest firmware
LAN Switch / Pro DJ Link Hub
All CDJs and mixer networked · Spare LAN cables (CAT5e+) on standby
ACCEPTABLE Setup B — CDJ-2000NXS2
2 × Pioneer CDJ-2000NXS2
Linked via LAN / Pro DJ Link · Latest firmware (min. 1.83) · USB slots free
1 × Pioneer DJM-900NXS2 or better
4-channel mixer · EQ at 12 o'clock · All channels open · Min. firmware 2.05
LAN Switch / Pro DJ Link Hub
All CDJs and mixer networked · Spare LAN cables on standby
ARTIST PROVIDES Denon Prime Go
Denon Prime Go Controller
Used as backup only, or as primary unit on the artist's explicit request. Not a default part of the setup. Requires 1 × spare mixer channel (line in, RCA or TRS)
1 × 230V Schuko power outlet
Within reach of the DJ booth — for controller power only
EXTRAS Additional Requirements
2 × DJ Booth Monitors
Minimum 200W per side · Volume adjustable from the DJ booth directly
Spare USB cables + power strip
Min. 2 × USB-A (for drives) · 1 × power strip accessible at booth
Booth lighting
Working light to see gear · No blinding strobes aimed directly at artist
02

Setup Diagram

CDJ-3000 / CDJ-2000NXS2
CH 1 · LEFT DECK · VINYL MODE
USB DRIVE IN
RCA + LAN
DJM-900NXS2 / DJM-A9 / DJM-V10
MASTER OUT → XLR → PA
CDJ-3000 / CDJ-2000NXS2
CH 2 · RIGHT DECK · VINYL MODE
USB DRIVE IN
RCA / LINE
Denon Prime Go
CH 3 · BACKUP / ON REQUEST
MASTER OUT: XLR BALANCED DECKS TO MIXER: RCA / PHONO LAN: PRO DJ LINK NETWORK
03

Technical Requirements

Mixer Settings

  • All EQ knobs at 12 o'clock (center) before handover
  • Master and booth faders at 0 dB / unity gain
  • All effects off — no reverb, echo or filter pre-set
  • Gain/trim for artist channels set to unity
  • Recording / stream output: APPROVED
    Sharing of recordings is permitted and encouraged

CDJ / Player Settings

  • Latest firmware on all players and mixer before event
  • Pro DJ Link active and all units linked before handover
  • Jog wheels set to VINYL MODE on all decks
  • No track pre-loaded — artist loads own media
  • Quantize: OFF by default
  • Master tempo: OFF by default

DJ Booth Specifications

  • Minimum 160 cm wide × 60 cm deep
  • Table height: 100–110 cm (artist is 188 cm — standard 90 cm booth is not suitable)
  • Adjustable or raised booth preferred — confirm in advance
  • Booth accessible 30 min before set for sound check
  • Water at the booth — non-carbonated, no ice

Cabling & Power

  • Master XLR output from mixer to PA / house system
  • All RCA cables tested — no hum or crackle
  • LAN cables CAT5e or better for Pro DJ Link
  • 1 × free 230V Schuko socket at booth for Denon Prime Go
  • Cable management — no loose cables in DJ walkway
04

Firmware Reference

DeviceMinimum VersionRecommendedStatus
Pioneer CDJ-30003.00 or higherLatest stableREQUIRED
Pioneer CDJ-2000NXS21.83 or higherLatest stableREQUIRED
Pioneer DJM-900NXS22.05 or higherLatest stableREQUIRED
Pioneer DJM-A91.10 or higherLatest stableIF APPLICABLE
Pioneer DJM-V10Latest availableLatest stableIF APPLICABLE

▶ Firmware downloads: support.pioneerdj.com — verify before every event

05

Important Notes

⛔ Not Negotiable

The artist will not perform if the minimum equipment (Setup A or Setup B) cannot be provided and no prior alternative has been agreed in writing. Please contact the artist via Instagram @djmajestic at least 72 hours before the event if there are any concerns.

⚠ Changeover

The artist requires a minimum 15 minutes changeover time before set start. During this window USB drives are loaded and Pro DJ Link is verified. Please build this into the running order and inform the previous act.

✓ Recording & Streaming

Recording and live streaming of the artist's set is fully approved. Sharing of recordings via social media, YouTube or archive platforms is permitted and encouraged. Please tag the artist: @djmajestic.

Artist Brings

  • USB drives with music — do not share or pre-load
  • Own headphones
  • Denon Prime Go (backup / on request only)
  • This technical rider document

Venue Provides

  • Setup A or B per specifications above
  • Functioning PA system with engineer on site
  • 2 × booth monitors (min. 200W each)
  • Booth height 100–110 cm (artist is 188 cm)
  • Soundcheck access 30 min before set
  • Water at the DJ booth
06

Hospitality

🚗
Parking
A free parking space at or near the venue is requested for every performance. When travelling from abroad or a significant distance, please arrange and confirm the parking location in advance. Costs for paid parking are to be reimbursed by the organiser.
🍽
Food & Meals
When the artist travels from abroad or the event requires travel of more than 100 km, a hot meal or meal voucher is requested — to be provided before the set. Dietary requirements: none. Please confirm arrangements in advance.
💧
At the Booth
Non-carbonated water at the DJ booth throughout the performance — minimum 1 litre. No ice. Additional drinks as available at the venue are appreciated but not required.
MAJESTIC · TECHNICAL RIDER 2026 © RAYMUNDO HOOTEN — PLEASE CONFIRM RECEIPT